16075 Highway 13 S., Prior Lake, Minnesota 55372 Phone: (952) 440-8778 or FAX (952) 440-8776
PARTS HOMEPAGE VEHICLES
FOR SALE E-MAIL
JOHN 
Jeep Radiator Hoses
Tired of poor quality hoses that crack? We were too. We have worked with
a manufacturer in the USA
to produce these hoses for you. The lower hose for the M38, MB, GPW and
the CJ series
is custom-made from the newest rubber and it also has the wire reinforcement
inside!
Exact fit and quality-tested.We also stock the correct hose clamps.
M38A1 Upper: $18.00
M38A1 Lower: $22.00
M38 Upper: $14.00
M38 Lower: $22.00
Bypass Hose: $9.75
M-Series Jeep Fording Exhaust Stack Support Bracket
We tooled up and made this hard-to-find part.
Exact reproduction.
Bracket - $38.00
Exhaust Stack Pipe, (not shown) - $45.00
M38 or M38A1 Steering Wheel
Reproduction wheel in black. Nice condition, close to the original.
Can be painted OD to match. Will also work for the CJ2A, CJ3A and CJ5.
$90.00
Jeep Water Pump
We are now stocking USA-made water pumps. Available with the single
groove pulley, or a reconditioned original two groove.
Guaranteed to have your belts run true and the proper fit so the pulley
won't fly off. Core pulley required for the two groove.
Single pulley pump - $60.00
Double pulley pump - CALL for pricing.
Taillight Door
NOS doors for all early M-series trucks. Left side with the red lens. Previously
not available as a separate item.
Now available, door only.
$25.00
Military Hold Downs
Now in stock, NOS hood and windshield hold downs. Right angle and straight
type for your Jeep and Dodge applications.
Will also work for other vehicles.
$14.00
Wiper Motor
NOS condition. Very hard to find in recent years. Rebuilds are costing as
much or more than our NOS ones.
We also have arms, blades and acorn nuts in stock.
Motor: $125.00
Jeep Engine Stay Cable
Engine stay cable for the M38 and 38A1. Very nice reproduction.
$20.00
Jeep Master Cylinder Cover Plates
Tired of paying the increasing prices on the import parts?
Now you can purchase a higher quality, USA-made part from us for less money.
Available for either the WWII Jeep or the M38 and A1. Also fits the CJ series
Jeeps!
$14.00 each
Oil Sender Brackets
New reproduction brackets for the oil sender.
Totally correct, ready for installation.
M38 and M38A1.
$23.00
Carb Kit
Now available -- an OEM-quality comprehensive kit.
Includes all hardware and the idle mixture screw.
Stop all those annoying run problems!
$55.00 each or 2/$95.00.
Jeep Bumper
Now finally available -- the correctly made, MWM repro, long bumper for
all late M38 A1's.
No holes to drill. Just paint and install. Correct tapered ends. $90.00
each.
Mirror Arm Assembly
Dissatisfied with the quality of the currently available mirror arms, we
had these nice, USA-made ones produced.
Arm and swivel can be used on M38, 38A1 and M37. We also have the correct
mounting brackets for
each model. All pieces can be purchased separately. Very nice repro black
mirror head also available.
Head is correct for all WWII vehicles and early M38 and M37. Standard color
mirrors also available.
Mirror Arm & Mounting Brackets - $32.00
Black Mirror Head - $27.00.
M38A1 Fording Cable Bracket
MWM reproduction lower fording cable bracket.
These are almost always missing.
Complete your restoration with this piece for only $15.00.
Wiring Harness Kits
Accurate reproduction harness kits with metal Douglas connectors.
Available pre-wired for turn signals also.
Replace that old, frayed harness before you have problems.
M38A1 Std. - $535.00
with signal - $575.00.
M38A1 Parking Brake Components
We are proud to offer a full range of parking brake parts for the M38A1.
We just finished making the rare shoe set. We now have everything you need
to install the parking brake system.
Shoe Set - $75.00
Pullrod - $24.00
Lower Lever - $49.00
Stop - $3.00
Anti-rattle Washer - $1.00 each
Parking Brake Anchor Pin
We have finally found some NOS parking brake anchor pins for the M38A1.
Now, combined with the other parts we stock, you can totally rebuild your
parking brake system and eliminate that rattling noise.
$9.50
Windshield Latch and Hook
We found a small quantity of NOS latches and NOS hooks.
Hook will also work on CJ's and M38's also!
Each sold separately.
Latch: $32.00
Hook: $17.00
Rear Seat Parts
Now you can get all the parts you need to repair or replace those always-missing
components.
Part MWM repro, part NOS.
Call for individual pricing.
Cowl Gasket
Get the best reproduction cowl seal available. Freshly made and guaranteed
to be the best fit on the market.
These are not the same as everyone else is selling.
$38.00
Rear Lift Shackle Bracket
An accurate MWM repro of this often-missing part.
Chain and clip included to retain the pin.
$24.00
Fuel Pick-Up Plate
This is MWM's reproduction fuel pick-up plate. It looks like NOS.
Complete in photos with an NOS filter, or, also available with an after
market filter.
Picture shows the M38A1 unit; M38 looks just like it only shorter.
Complete with NOS filter - $149.00.
Complete with after market filter - $125.00.
Turn Signal Lens Conversion Kit
Installing turn signals on your M-series Jeep?
Then you need this amber lens kit. Everything you need
to convert your marker light to a signal lamp.
$10.00 each.
Jeep Knuckle Seal Kit
NOS set of 4 retainers, springs and seals.
Correct for MB< GPW, M38 or 38A1, and civilian jeeps.
$45.00 set of four.
Battery Cable Set
Correct size, length and ends. MWM repro.
$70.00 each.
Terminal ends are separate at $5.75 each.
Wiper Motor Acorn Nuts
We just had these made by the original contractor.
$3.00 each.
Radio Power Cable Guard
Cover your power cable going across the rear floor with this MWM repro.
Correct for any M38 or M38A1 Jeep.
$15.00
Top Bow Rod Kit
A MWM repro of this always-missing and necessary part to
put your canvas top and side curtains on.
Specify M38 or M38A1 when ordering.
$42.00
Top Bow Rod Brackets
M38A1 Windshield Brackets. Accurate MWM repro. Specify left or right.
$8.50 each.
M38A1 Windshield-to-Hood Rests
Left and right brackets for your 38A1 windshield frame.
Never before available, now a MWM repro is. Comes as a kit.
$24.00/kit.
38A1 Fuel Tank Filler Neck Pre-Filter Screen
NOS.
$30.00
Super Winch Lockout Hubs
Correct fit for all M38's or A1's.
$119.00/set.
Rifle Rack
Best quality repro of this very hard-to-find item.
Carried in most WWII and Early M-Series vehicles.
Currently out of stock.